by HVAC Builder
Open this system in HVAC Builder Load it into the 3D builder, adjust it to your project, and solve it against your own climate — or drop it into a building model and simulate a full year.
A liquid-cooled IT load and nothing but water between it and the outside: an immersion tank whose dielectric fluid is cooled by a coil-and-plate exchanger fed straight from a small evaporative cooling tower — no chiller, no air handler, no refrigerant, the arrangement the tank makers sell for data centres. The tank is a **liquid-cooled load**: 45 kW of servers declared as the load, the exchanger between the fluid and the water rated at a point the way a coaxial condenser is, and the solution reports the dielectric temperature the servers sit in — here 39 °C on a 35 °C / 25.6 °C wet-bulb design day, under the 45 °C limit declared. The tower is BAC's VT0-12-E at its published rating. Published as an example; the figures below are solved from this model.
Example30–53 kW coolingEUExample system. Published by HVAC Builder to show suppliers what their own page looks like. There is no company behind it and it is not a product offer — the specification is generic and the performance is solved from the model on this page.
Solved from this example's own model each time the page loads — the same numbers a supplier's page shows for their machine.
| Component | Kind | Duty |
|---|---|---|
| VT0-12-E fill | wetPack | -45.0 kW |
| VT0-12-E fan | fan | -1.1 kW |
| Tower-loop circulator | pump | — |
| Immersion tank (45 kW IT load) | liquidLoad | — |
Publish your own range and this slot becomes your branded page — your data, your logo, your product link, and quote requests that reach you. Free to register and free to publish.