Published systems

BAC's PFI-2418N-3D4DS-P2 — a PFi closed-circuit cooler, 509 nominal tons (2239 kW): rated to cool 1533 USGPM of process fluid from 95 to 85 °F at a 78 °F entering wet bulb on 125.6 m³/s of air, the maker's own printed airflow, and drawn at those flows with an induced-draft fan on the leaving air, pulling through the fill. The process fluid runs inside a coil under the spray — the evaporative wet-coil model, its two conductances split as the range's own coil volumes say. The model derives the machine's NTU from that one certified point, so it reproduces the rated leaving process fluid exactly and predicts nothing else — one point per model is an input, not a validation. Modelled from the manufacturer's published data — not verified by Baltimore Aircoil. Published as an example; the figures below are solved from this model.

BAC's PFI-2418N-3D4DS-Q2 — a PFi closed-circuit cooler, 535 nominal tons (2353 kW): rated to cool 1611 USGPM of process fluid from 95 to 85 °F at a 78 °F entering wet bulb on 134.6 m³/s of air, the maker's own printed airflow, and drawn at those flows with an induced-draft fan on the leaving air, pulling through the fill. The process fluid runs inside a coil under the spray — the evaporative wet-coil model, its two conductances split as the range's own coil volumes say. The model derives the machine's NTU from that one certified point, so it reproduces the rated leaving process fluid exactly and predicts nothing else — one point per model is an input, not a validation. Modelled from the manufacturer's published data — not verified by Baltimore Aircoil. Published as an example; the figures below are solved from this model.

BAC's PFI-2418N-3D4ES-M2 — a PFi closed-circuit cooler, 463 nominal tons (2037 kW): rated to cool 1395 USGPM of process fluid from 95 to 85 °F at a 78 °F entering wet bulb on 98.2 m³/s of air, the maker's own printed airflow, and drawn at those flows with an induced-draft fan on the leaving air, pulling through the fill. The process fluid runs inside a coil under the spray — the evaporative wet-coil model, its two conductances split as the range's own coil volumes say. The model derives the machine's NTU from that one certified point, so it reproduces the rated leaving process fluid exactly and predicts nothing else — one point per model is an input, not a validation. Modelled from the manufacturer's published data — not verified by Baltimore Aircoil. Published as an example; the figures below are solved from this model.

BAC's PFI-2418N-3D4ES-R2 — a PFi closed-circuit cooler, 592 nominal tons (2603 kW): rated to cool 1782 USGPM of process fluid from 95 to 85 °F at a 78 °F entering wet bulb on 138.6 m³/s of air, the maker's own printed airflow, and drawn at those flows with an induced-draft fan on the leaving air, pulling through the fill. The process fluid runs inside a coil under the spray — the evaporative wet-coil model, its two conductances split as the range's own coil volumes say. The model derives the machine's NTU from that one certified point, so it reproduces the rated leaving process fluid exactly and predicts nothing else — one point per model is an input, not a validation. Modelled from the manufacturer's published data — not verified by Baltimore Aircoil. Published as an example; the figures below are solved from this model.

BAC's PFI-2418N-4D1ES-O2 — a PFi closed-circuit cooler, 541 nominal tons (2379 kW): rated to cool 1629 USGPM of process fluid from 95 to 85 °F at a 78 °F entering wet bulb on 117.2 m³/s of air, the maker's own printed airflow, and drawn at those flows with an induced-draft fan on the leaving air, pulling through the fill. The process fluid runs inside a coil under the spray — the evaporative wet-coil model, its two conductances split as the range's own coil volumes say. The model derives the machine's NTU from that one certified point, so it reproduces the rated leaving process fluid exactly and predicts nothing else — one point per model is an input, not a validation. Modelled from the manufacturer's published data — not verified by Baltimore Aircoil. Published as an example; the figures below are solved from this model.

BAC's PFI-2418N-4D2ES-Q2 — a PFi closed-circuit cooler, 616 nominal tons (2708 kW): rated to cool 1854 USGPM of process fluid from 95 to 85 °F at a 78 °F entering wet bulb on 133.0 m³/s of air, the maker's own printed airflow, and drawn at those flows with an induced-draft fan on the leaving air, pulling through the fill. The process fluid runs inside a coil under the spray — the evaporative wet-coil model, its two conductances split as the range's own coil volumes say. The model derives the machine's NTU from that one certified point, so it reproduces the rated leaving process fluid exactly and predicts nothing else — one point per model is an input, not a validation. Modelled from the manufacturer's published data — not verified by Baltimore Aircoil. Published as an example; the figures below are solved from this model.

BAC's PFI-2418N-4D2ES-R2 — a PFi closed-circuit cooler, 641 nominal tons (2817 kW): rated to cool 1929 USGPM of process fluid from 95 to 85 °F at a 78 °F entering wet bulb on 140.9 m³/s of air, the maker's own printed airflow, and drawn at those flows with an induced-draft fan on the leaving air, pulling through the fill. The process fluid runs inside a coil under the spray — the evaporative wet-coil model, its two conductances split as the range's own coil volumes say. The model derives the machine's NTU from that one certified point, so it reproduces the rated leaving process fluid exactly and predicts nothing else — one point per model is an input, not a validation. Modelled from the manufacturer's published data — not verified by Baltimore Aircoil. Published as an example; the figures below are solved from this model.

BAC's PFI-2418N-4D3DS-P2 — a PFi closed-circuit cooler, 553 nominal tons (2432 kW): rated to cool 1665 USGPM of process fluid from 95 to 85 °F at a 78 °F entering wet bulb on 122.0 m³/s of air, the maker's own printed airflow, and drawn at those flows with an induced-draft fan on the leaving air, pulling through the fill. The process fluid runs inside a coil under the spray — the evaporative wet-coil model, its two conductances split as the range's own coil volumes say. The model derives the machine's NTU from that one certified point, so it reproduces the rated leaving process fluid exactly and predicts nothing else — one point per model is an input, not a validation. Modelled from the manufacturer's published data — not verified by Baltimore Aircoil. Published as an example; the figures below are solved from this model.

BAC's PFI-2418N-4D3ES-P2 — a PFi closed-circuit cooler, 592 nominal tons (2603 kW): rated to cool 1782 USGPM of process fluid from 95 to 85 °F at a 78 °F entering wet bulb on 118.7 m³/s of air, the maker's own printed airflow, and drawn at those flows with an induced-draft fan on the leaving air, pulling through the fill. The process fluid runs inside a coil under the spray — the evaporative wet-coil model, its two conductances split as the range's own coil volumes say. The model derives the machine's NTU from that one certified point, so it reproduces the rated leaving process fluid exactly and predicts nothing else — one point per model is an input, not a validation. Modelled from the manufacturer's published data — not verified by Baltimore Aircoil. Published as an example; the figures below are solved from this model.

BAC's PFI-2418N-4D3ES-Q2 — a PFi closed-circuit cooler, 623 nominal tons (2738 kW): rated to cool 1875 USGPM of process fluid from 95 to 85 °F at a 78 °F entering wet bulb on 127.3 m³/s of air, the maker's own printed airflow, and drawn at those flows with an induced-draft fan on the leaving air, pulling through the fill. The process fluid runs inside a coil under the spray — the evaporative wet-coil model, its two conductances split as the range's own coil volumes say. The model derives the machine's NTU from that one certified point, so it reproduces the rated leaving process fluid exactly and predicts nothing else — one point per model is an input, not a validation. Modelled from the manufacturer's published data — not verified by Baltimore Aircoil. Published as an example; the figures below are solved from this model.

BAC's PFI-2418N-4D4DS-M2 — a PFi closed-circuit cooler, 475 nominal tons (2090 kW): rated to cool 1431 USGPM of process fluid from 95 to 85 °F at a 78 °F entering wet bulb on 95.6 m³/s of air, the maker's own printed airflow, and drawn at those flows with an induced-draft fan on the leaving air, pulling through the fill. The process fluid runs inside a coil under the spray — the evaporative wet-coil model, its two conductances split as the range's own coil volumes say. The model derives the machine's NTU from that one certified point, so it reproduces the rated leaving process fluid exactly and predicts nothing else — one point per model is an input, not a validation. Modelled from the manufacturer's published data — not verified by Baltimore Aircoil. Published as an example; the figures below are solved from this model.

BAC's PFI-2418N-4D4DS-O2 — a PFi closed-circuit cooler, 527 nominal tons (2318 kW): rated to cool 1587 USGPM of process fluid from 95 to 85 °F at a 78 °F entering wet bulb on 108.4 m³/s of air, the maker's own printed airflow, and drawn at those flows with an induced-draft fan on the leaving air, pulling through the fill. The process fluid runs inside a coil under the spray — the evaporative wet-coil model, its two conductances split as the range's own coil volumes say. The model derives the machine's NTU from that one certified point, so it reproduces the rated leaving process fluid exactly and predicts nothing else — one point per model is an input, not a validation. Modelled from the manufacturer's published data — not verified by Baltimore Aircoil. Published as an example; the figures below are solved from this model.

BAC's PFI-2418N-4D4DS-P2 — a PFi closed-circuit cooler, 569 nominal tons (2502 kW): rated to cool 1713 USGPM of process fluid from 95 to 85 °F at a 78 °F entering wet bulb on 118.4 m³/s of air, the maker's own printed airflow, and drawn at those flows with an induced-draft fan on the leaving air, pulling through the fill. The process fluid runs inside a coil under the spray — the evaporative wet-coil model, its two conductances split as the range's own coil volumes say. The model derives the machine's NTU from that one certified point, so it reproduces the rated leaving process fluid exactly and predicts nothing else — one point per model is an input, not a validation. Modelled from the manufacturer's published data — not verified by Baltimore Aircoil. Published as an example; the figures below are solved from this model.

BAC's PFI-2418N-4D4ES-Q2 — a PFi closed-circuit cooler, 637 nominal tons (2800 kW): rated to cool 1917 USGPM of process fluid from 95 to 85 °F at a 78 °F entering wet bulb on 123.8 m³/s of air, the maker's own printed airflow, and drawn at those flows with an induced-draft fan on the leaving air, pulling through the fill. The process fluid runs inside a coil under the spray — the evaporative wet-coil model, its two conductances split as the range's own coil volumes say. The model derives the machine's NTU from that one certified point, so it reproduces the rated leaving process fluid exactly and predicts nothing else — one point per model is an input, not a validation. Modelled from the manufacturer's published data — not verified by Baltimore Aircoil. Published as an example; the figures below are solved from this model.

BAC's PFI-2418N-4D4ES-R2 — a PFi closed-circuit cooler, 666 nominal tons (2927 kW): rated to cool 2004 USGPM of process fluid from 95 to 85 °F at a 78 °F entering wet bulb on 131.0 m³/s of air, the maker's own printed airflow, and drawn at those flows with an induced-draft fan on the leaving air, pulling through the fill. The process fluid runs inside a coil under the spray — the evaporative wet-coil model, its two conductances split as the range's own coil volumes say. The model derives the machine's NTU from that one certified point, so it reproduces the rated leaving process fluid exactly and predicts nothing else — one point per model is an input, not a validation. Modelled from the manufacturer's published data — not verified by Baltimore Aircoil. Published as an example; the figures below are solved from this model.

BAC's PFI-2418N-5D2ES-Q2 — a PFi closed-circuit cooler, 658 nominal tons (2892 kW): rated to cool 1980 USGPM of process fluid from 95 to 85 °F at a 78 °F entering wet bulb on 127.7 m³/s of air, the maker's own printed airflow, and drawn at those flows with an induced-draft fan on the leaving air, pulling through the fill. The process fluid runs inside a coil under the spray — the evaporative wet-coil model, its two conductances split as the range's own coil volumes say. The model derives the machine's NTU from that one certified point, so it reproduces the rated leaving process fluid exactly and predicts nothing else — one point per model is an input, not a validation. Modelled from the manufacturer's published data — not verified by Baltimore Aircoil. Published as an example; the figures below are solved from this model.

BAC's PFI-2418N-6D1ES-R2 — a PFi closed-circuit cooler, 719 nominal tons (3159 kW): rated to cool 2163 USGPM of process fluid from 95 to 85 °F at a 78 °F entering wet bulb on 135.9 m³/s of air, the maker's own printed airflow, and drawn at those flows with an induced-draft fan on the leaving air, pulling through the fill. The process fluid runs inside a coil under the spray — the evaporative wet-coil model, its two conductances split as the range's own coil volumes say. The model derives the machine's NTU from that one certified point, so it reproduces the rated leaving process fluid exactly and predicts nothing else — one point per model is an input, not a validation. Modelled from the manufacturer's published data — not verified by Baltimore Aircoil. Published as an example; the figures below are solved from this model.

BAC's PFI-2418N-6D3ES-R2 — a PFi closed-circuit cooler, 703 nominal tons (3089 kW): rated to cool 2115 USGPM of process fluid from 95 to 85 °F at a 78 °F entering wet bulb on 123.6 m³/s of air, the maker's own printed airflow, and drawn at those flows with an induced-draft fan on the leaving air, pulling through the fill. The process fluid runs inside a coil under the spray — the evaporative wet-coil model, its two conductances split as the range's own coil volumes say. The model derives the machine's NTU from that one certified point, so it reproduces the rated leaving process fluid exactly and predicts nothing else — one point per model is an input, not a validation. Modelled from the manufacturer's published data — not verified by Baltimore Aircoil. Published as an example; the figures below are solved from this model.