Published systems

BAC's PFI-1224N-6D1ES-O2 — a PFi closed-circuit cooler, 434 nominal tons (1906 kW): rated to cool 1305 USGPM of process fluid from 95 to 85 °F at a 78 °F entering wet bulb on 82.4 m³/s of air, the maker's own printed airflow, and drawn at those flows with an induced-draft fan on the leaving air, pulling through the fill. The process fluid runs inside a coil under the spray — the evaporative wet-coil model, its two conductances split as the range's own coil volumes say. The model derives the machine's NTU from that one certified point, so it reproduces the rated leaving process fluid exactly and predicts nothing else — one point per model is an input, not a validation. Modelled from the manufacturer's published data — not verified by Baltimore Aircoil. Published as an example; the figures below are solved from this model.

BAC's PFI-1224N-6D1ES-P2 — a PFi closed-circuit cooler, 462 nominal tons (2033 kW): rated to cool 1392 USGPM of process fluid from 95 to 85 °F at a 78 °F entering wet bulb on 90.1 m³/s of air, the maker's own printed airflow, and drawn at those flows with an induced-draft fan on the leaving air, pulling through the fill. The process fluid runs inside a coil under the spray — the evaporative wet-coil model, its two conductances split as the range's own coil volumes say. The model derives the machine's NTU from that one certified point, so it reproduces the rated leaving process fluid exactly and predicts nothing else — one point per model is an input, not a validation. Modelled from the manufacturer's published data — not verified by Baltimore Aircoil. Published as an example; the figures below are solved from this model.

BAC's PFI-1236N-2D1DS-N2 — a PFi closed-circuit cooler, 331 nominal tons (1455 kW): rated to cool 996 USGPM of process fluid from 95 to 85 °F at a 78 °F entering wet bulb on 126.1 m³/s of air, the maker's own printed airflow, and drawn at those flows with an induced-draft fan on the leaving air, pulling through the fill. The process fluid runs inside a coil under the spray — the evaporative wet-coil model, its two conductances split as the range's own coil volumes say. The model derives the machine's NTU from that one certified point, so it reproduces the rated leaving process fluid exactly and predicts nothing else — one point per model is an input, not a validation. Modelled from the manufacturer's published data — not verified by Baltimore Aircoil. Published as an example; the figures below are solved from this model.

BAC's PFI-1236N-2D2DS-N2 — a PFi closed-circuit cooler, 343 nominal tons (1507 kW): rated to cool 1032 USGPM of process fluid from 95 to 85 °F at a 78 °F entering wet bulb on 122.8 m³/s of air, the maker's own printed airflow, and drawn at those flows with an induced-draft fan on the leaving air, pulling through the fill. The process fluid runs inside a coil under the spray — the evaporative wet-coil model, its two conductances split as the range's own coil volumes say. The model derives the machine's NTU from that one certified point, so it reproduces the rated leaving process fluid exactly and predicts nothing else — one point per model is an input, not a validation. Modelled from the manufacturer's published data — not verified by Baltimore Aircoil. Published as an example; the figures below are solved from this model.

BAC's PFI-1236N-2D2DS-O2 — a PFi closed-circuit cooler, 356 nominal tons (1564 kW): rated to cool 1071 USGPM of process fluid from 95 to 85 °F at a 78 °F entering wet bulb on 130.2 m³/s of air, the maker's own printed airflow, and drawn at those flows with an induced-draft fan on the leaving air, pulling through the fill. The process fluid runs inside a coil under the spray — the evaporative wet-coil model, its two conductances split as the range's own coil volumes say. The model derives the machine's NTU from that one certified point, so it reproduces the rated leaving process fluid exactly and predicts nothing else — one point per model is an input, not a validation. Modelled from the manufacturer's published data — not verified by Baltimore Aircoil. Published as an example; the figures below are solved from this model.

BAC's PFI-1236N-2D2ES-M2 — a PFi closed-circuit cooler, 353 nominal tons (1551 kW): rated to cool 1062 USGPM of process fluid from 95 to 85 °F at a 78 °F entering wet bulb on 109.2 m³/s of air, the maker's own printed airflow, and drawn at those flows with an induced-draft fan on the leaving air, pulling through the fill. The process fluid runs inside a coil under the spray — the evaporative wet-coil model, its two conductances split as the range's own coil volumes say. The model derives the machine's NTU from that one certified point, so it reproduces the rated leaving process fluid exactly and predicts nothing else — one point per model is an input, not a validation. Modelled from the manufacturer's published data — not verified by Baltimore Aircoil. Published as an example; the figures below are solved from this model.

BAC's PFI-1236N-2D3DS-K2 — a PFi closed-circuit cooler, 296 nominal tons (1301 kW): rated to cool 891 USGPM of process fluid from 95 to 85 °F at a 78 °F entering wet bulb on 88.5 m³/s of air, the maker's own printed airflow, and drawn at those flows with an induced-draft fan on the leaving air, pulling through the fill. The process fluid runs inside a coil under the spray — the evaporative wet-coil model, its two conductances split as the range's own coil volumes say. The model derives the machine's NTU from that one certified point, so it reproduces the rated leaving process fluid exactly and predicts nothing else — one point per model is an input, not a validation. Modelled from the manufacturer's published data — not verified by Baltimore Aircoil. Published as an example; the figures below are solved from this model.

BAC's PFI-1236N-2D4DS-P2 — a PFi closed-circuit cooler, 402 nominal tons (1766 kW): rated to cool 1209 USGPM of process fluid from 95 to 85 °F at a 78 °F entering wet bulb on 135.1 m³/s of air, the maker's own printed airflow, and drawn at those flows with an induced-draft fan on the leaving air, pulling through the fill. The process fluid runs inside a coil under the spray — the evaporative wet-coil model, its two conductances split as the range's own coil volumes say. The model derives the machine's NTU from that one certified point, so it reproduces the rated leaving process fluid exactly and predicts nothing else — one point per model is an input, not a validation. Modelled from the manufacturer's published data — not verified by Baltimore Aircoil. Published as an example; the figures below are solved from this model.

BAC's PFI-1236N-2D4ES-K2 — a PFi closed-circuit cooler, 319 nominal tons (1402 kW): rated to cool 960 USGPM of process fluid from 95 to 85 °F at a 78 °F entering wet bulb on 83.4 m³/s of air, the maker's own printed airflow, and drawn at those flows with an induced-draft fan on the leaving air, pulling through the fill. The process fluid runs inside a coil under the spray — the evaporative wet-coil model, its two conductances split as the range's own coil volumes say. The model derives the machine's NTU from that one certified point, so it reproduces the rated leaving process fluid exactly and predicts nothing else — one point per model is an input, not a validation. Modelled from the manufacturer's published data — not verified by Baltimore Aircoil. Published as an example; the figures below are solved from this model.

BAC's PFI-1236N-2D4ES-M2 — a PFi closed-circuit cooler, 369 nominal tons (1621 kW): rated to cool 1110 USGPM of process fluid from 95 to 85 °F at a 78 °F entering wet bulb on 104.4 m³/s of air, the maker's own printed airflow, and drawn at those flows with an induced-draft fan on the leaving air, pulling through the fill. The process fluid runs inside a coil under the spray — the evaporative wet-coil model, its two conductances split as the range's own coil volumes say. The model derives the machine's NTU from that one certified point, so it reproduces the rated leaving process fluid exactly and predicts nothing else — one point per model is an input, not a validation. Modelled from the manufacturer's published data — not verified by Baltimore Aircoil. Published as an example; the figures below are solved from this model.

BAC's PFI-1236N-2D4ES-N2 — a PFi closed-circuit cooler, 387 nominal tons (1700 kW): rated to cool 1164 USGPM of process fluid from 95 to 85 °F at a 78 °F entering wet bulb on 112.1 m³/s of air, the maker's own printed airflow, and drawn at those flows with an induced-draft fan on the leaving air, pulling through the fill. The process fluid runs inside a coil under the spray — the evaporative wet-coil model, its two conductances split as the range's own coil volumes say. The model derives the machine's NTU from that one certified point, so it reproduces the rated leaving process fluid exactly and predicts nothing else — one point per model is an input, not a validation. Modelled from the manufacturer's published data — not verified by Baltimore Aircoil. Published as an example; the figures below are solved from this model.

BAC's PFI-1236N-2D4ES-P2 — a PFi closed-circuit cooler, 424 nominal tons (1862 kW): rated to cool 1275 USGPM of process fluid from 95 to 85 °F at a 78 °F entering wet bulb on 130.3 m³/s of air, the maker's own printed airflow, and drawn at those flows with an induced-draft fan on the leaving air, pulling through the fill. The process fluid runs inside a coil under the spray — the evaporative wet-coil model, its two conductances split as the range's own coil volumes say. The model derives the machine's NTU from that one certified point, so it reproduces the rated leaving process fluid exactly and predicts nothing else — one point per model is an input, not a validation. Modelled from the manufacturer's published data — not verified by Baltimore Aircoil. Published as an example; the figures below are solved from this model.

BAC's PFI-1236N-3D1DS-L2 — a PFi closed-circuit cooler, 384 nominal tons (1687 kW): rated to cool 1155 USGPM of process fluid from 95 to 85 °F at a 78 °F entering wet bulb on 101.7 m³/s of air, the maker's own printed airflow, and drawn at those flows with an induced-draft fan on the leaving air, pulling through the fill. The process fluid runs inside a coil under the spray — the evaporative wet-coil model, its two conductances split as the range's own coil volumes say. The model derives the machine's NTU from that one certified point, so it reproduces the rated leaving process fluid exactly and predicts nothing else — one point per model is an input, not a validation. Modelled from the manufacturer's published data — not verified by Baltimore Aircoil. Published as an example; the figures below are solved from this model.

BAC's PFI-1236N-3D1DS-O2 — a PFi closed-circuit cooler, 438 nominal tons (1923 kW): rated to cool 1317 USGPM of process fluid from 95 to 85 °F at a 78 °F entering wet bulb on 126.9 m³/s of air, the maker's own printed airflow, and drawn at those flows with an induced-draft fan on the leaving air, pulling through the fill. The process fluid runs inside a coil under the spray — the evaporative wet-coil model, its two conductances split as the range's own coil volumes say. The model derives the machine's NTU from that one certified point, so it reproduces the rated leaving process fluid exactly and predicts nothing else — one point per model is an input, not a validation. Modelled from the manufacturer's published data — not verified by Baltimore Aircoil. Published as an example; the figures below are solved from this model.

BAC's PFI-1236N-3D1ES-R2 — a PFi closed-circuit cooler, 543 nominal tons (2388 kW): rated to cool 1635 USGPM of process fluid from 95 to 85 °F at a 78 °F entering wet bulb on 152.4 m³/s of air, the maker's own printed airflow, and drawn at those flows with an induced-draft fan on the leaving air, pulling through the fill. The process fluid runs inside a coil under the spray — the evaporative wet-coil model, its two conductances split as the range's own coil volumes say. The model derives the machine's NTU from that one certified point, so it reproduces the rated leaving process fluid exactly and predicts nothing else — one point per model is an input, not a validation. Modelled from the manufacturer's published data — not verified by Baltimore Aircoil. Published as an example; the figures below are solved from this model.

BAC's PFI-1236N-3D2DS-P2 — a PFi closed-circuit cooler, 481 nominal tons (2116 kW): rated to cool 1449 USGPM of process fluid from 95 to 85 °F at a 78 °F entering wet bulb on 134.5 m³/s of air, the maker's own printed airflow, and drawn at those flows with an induced-draft fan on the leaving air, pulling through the fill. The process fluid runs inside a coil under the spray — the evaporative wet-coil model, its two conductances split as the range's own coil volumes say. The model derives the machine's NTU from that one certified point, so it reproduces the rated leaving process fluid exactly and predicts nothing else — one point per model is an input, not a validation. Modelled from the manufacturer's published data — not verified by Baltimore Aircoil. Published as an example; the figures below are solved from this model.

BAC's PFI-1236N-3D2DS-Q2 — a PFi closed-circuit cooler, 504 nominal tons (2217 kW): rated to cool 1518 USGPM of process fluid from 95 to 85 °F at a 78 °F entering wet bulb on 144.3 m³/s of air, the maker's own printed airflow, and drawn at those flows with an induced-draft fan on the leaving air, pulling through the fill. The process fluid runs inside a coil under the spray — the evaporative wet-coil model, its two conductances split as the range's own coil volumes say. The model derives the machine's NTU from that one certified point, so it reproduces the rated leaving process fluid exactly and predicts nothing else — one point per model is an input, not a validation. Modelled from the manufacturer's published data — not verified by Baltimore Aircoil. Published as an example; the figures below are solved from this model.

BAC's PFI-1236N-3D2ES-P2 — a PFi closed-circuit cooler, 520 nominal tons (2287 kW): rated to cool 1566 USGPM of process fluid from 95 to 85 °F at a 78 °F entering wet bulb on 129.8 m³/s of air, the maker's own printed airflow, and drawn at those flows with an induced-draft fan on the leaving air, pulling through the fill. The process fluid runs inside a coil under the spray — the evaporative wet-coil model, its two conductances split as the range's own coil volumes say. The model derives the machine's NTU from that one certified point, so it reproduces the rated leaving process fluid exactly and predicts nothing else — one point per model is an input, not a validation. Modelled from the manufacturer's published data — not verified by Baltimore Aircoil. Published as an example; the figures below are solved from this model.

BAC's PFI-1236N-3D2ES-R2 — a PFi closed-circuit cooler, 562 nominal tons (2471 kW): rated to cool 1692 USGPM of process fluid from 95 to 85 °F at a 78 °F entering wet bulb on 147.7 m³/s of air, the maker's own printed airflow, and drawn at those flows with an induced-draft fan on the leaving air, pulling through the fill. The process fluid runs inside a coil under the spray — the evaporative wet-coil model, its two conductances split as the range's own coil volumes say. The model derives the machine's NTU from that one certified point, so it reproduces the rated leaving process fluid exactly and predicts nothing else — one point per model is an input, not a validation. Modelled from the manufacturer's published data — not verified by Baltimore Aircoil. Published as an example; the figures below are solved from this model.

BAC's PFI-1236N-3D3DS-L2 — a PFi closed-circuit cooler, 396 nominal tons (1739 kW): rated to cool 1191 USGPM of process fluid from 95 to 85 °F at a 78 °F entering wet bulb on 94.8 m³/s of air, the maker's own printed airflow, and drawn at those flows with an induced-draft fan on the leaving air, pulling through the fill. The process fluid runs inside a coil under the spray — the evaporative wet-coil model, its two conductances split as the range's own coil volumes say. The model derives the machine's NTU from that one certified point, so it reproduces the rated leaving process fluid exactly and predicts nothing else — one point per model is an input, not a validation. Modelled from the manufacturer's published data — not verified by Baltimore Aircoil. Published as an example; the figures below are solved from this model.

BAC's PFI-1236N-3D3ES-O2 — a PFi closed-circuit cooler, 496 nominal tons (2182 kW): rated to cool 1494 USGPM of process fluid from 95 to 85 °F at a 78 °F entering wet bulb on 114.0 m³/s of air, the maker's own printed airflow, and drawn at those flows with an induced-draft fan on the leaving air, pulling through the fill. The process fluid runs inside a coil under the spray — the evaporative wet-coil model, its two conductances split as the range's own coil volumes say. The model derives the machine's NTU from that one certified point, so it reproduces the rated leaving process fluid exactly and predicts nothing else — one point per model is an input, not a validation. Modelled from the manufacturer's published data — not verified by Baltimore Aircoil. Published as an example; the figures below are solved from this model.

BAC's PFI-1236N-3D4DS-M2 — a PFi closed-circuit cooler, 432 nominal tons (1897 kW): rated to cool 1299 USGPM of process fluid from 95 to 85 °F at a 78 °F entering wet bulb on 101.2 m³/s of air, the maker's own printed airflow, and drawn at those flows with an induced-draft fan on the leaving air, pulling through the fill. The process fluid runs inside a coil under the spray — the evaporative wet-coil model, its two conductances split as the range's own coil volumes say. The model derives the machine's NTU from that one certified point, so it reproduces the rated leaving process fluid exactly and predicts nothing else — one point per model is an input, not a validation. Modelled from the manufacturer's published data — not verified by Baltimore Aircoil. Published as an example; the figures below are solved from this model.

BAC's PFI-1236N-3D4DS-N2 — a PFi closed-circuit cooler, 454 nominal tons (1998 kW): rated to cool 1368 USGPM of process fluid from 95 to 85 °F at a 78 °F entering wet bulb on 108.5 m³/s of air, the maker's own printed airflow, and drawn at those flows with an induced-draft fan on the leaving air, pulling through the fill. The process fluid runs inside a coil under the spray — the evaporative wet-coil model, its two conductances split as the range's own coil volumes say. The model derives the machine's NTU from that one certified point, so it reproduces the rated leaving process fluid exactly and predicts nothing else — one point per model is an input, not a validation. Modelled from the manufacturer's published data — not verified by Baltimore Aircoil. Published as an example; the figures below are solved from this model.

BAC's PFI-1236N-3D4DS-P2 — a PFi closed-circuit cooler, 509 nominal tons (2239 kW): rated to cool 1533 USGPM of process fluid from 95 to 85 °F at a 78 °F entering wet bulb on 125.6 m³/s of air, the maker's own printed airflow, and drawn at those flows with an induced-draft fan on the leaving air, pulling through the fill. The process fluid runs inside a coil under the spray — the evaporative wet-coil model, its two conductances split as the range's own coil volumes say. The model derives the machine's NTU from that one certified point, so it reproduces the rated leaving process fluid exactly and predicts nothing else — one point per model is an input, not a validation. Modelled from the manufacturer's published data — not verified by Baltimore Aircoil. Published as an example; the figures below are solved from this model.